TEL ： 13968321612
News
How to choose the rapid mold changing system of the injection mold?
- Class：Industry Trends
- Author：Administrator
- From：Ningbo Shuangke Plastic Machinery Manchinery Co.,Ltd
- Time：2022-04-10 14:42:29
- Hits：226
How to choose the rapid mold changing system of the injection mold?
When choosing the injection molding system, we need to have a basic understanding of the fast mold changing system.The rapid mode changing system on the market is mainly divided into pressure plate mode changing system, hydraulic mode changing system and magnetic mode locking system.
Die system is the early mold system, it is characterized by limited a few pressure point, clamp pressure around the mold back point, this way long time and labor intensity, and due to the center of the deformation and the clamp force, work engineering mold deformation, plate and bolts often need to replace, mold labor cost is high, is not suitable for the current mechanical equipment installation.
Hydraulic die changing system generally only four points, and the pressure plate lock mold has the same problem, easy to make the mold deformation, and because the clamp point is fixed, so the mold back plate should be made into the same specification, resulting in waste and poor adaptability.The thickness of the bottom plate is limited, reduce the efficiency of full use, the hydraulic oil pump must work for a long time, large energy consumption, frequent oil leakage, manual cleaning, high maintenance cost.Magnetic mode change is different, magnetic mode change system is a rapid development in recent years, widely accepted and adopted by Europe and the United States, its mode change time can be shortened to a few minutes, labor intensity is small, only need one person to operate.Because the magnetic template full contact surface clamp force is uniform, the mold can basically avoid deformation in the work, the precision and consistency of injection molding parts is very good, suitable for various forms and specifications of injection molding machine.In addition, the system has no mechanical action, only charge back magnetization instant electricity, does not consume electricity in the working process, so in the use of no need to be special maintenance, the service life is very long.
The process of industrial modernization is accelerating, and enterprises are also facing increasing pressure. Improving work efficiency is to reduce production costs and relieve operating pressure for enterprises.As a new equipment to shorten labor cost and power consumption, magnetic mold changing system is the ideal injection mold changing system for many enterprises.
Hufang Zone, Xiaogang Street, Beilun District, Ningbo city,zhejiang province,china
Copyright ? 2022-2027 Ningbo Shuangke Plastic Machinery Manchinery Co.,Ltd All Right Reserved ICP 123456789 Technical Support： ZB Software